Configuración Router de SICOSOFT

Configuración Router de SICOSOFT

Para el de obelisk (en estos momentos 3.0.1.52):

Router	Linksys
IP router	192.168.0.2
IP database	192.168.0.1
User	admin
Pass	qnip7ag3
IP WAN	80.28.221.188
Teléfono	91.662.02.54
User ADSL	adslppp@telefonicanetpa
Passwd ADSL	adslppp
Servicio Técnico Telefónica Empresas	902.357.022

Para el iRouter de internetti (3.0.1.51)

IP LAN	192.168.0.2
IP internetti	192.168.0.1
User	1234
Pass	QniP7ag3St
IP WAN	80.28.211.112
Teléfono	91.870.93.14
Servicio Técnico Telefónica Empresas	902.357.022

NOTA: cómo forwardear puertos

Pymes: 900.10.10.10
Averias: 1002

Módem speedtouch:
Se entra con un telnet.
Una vez dentro, tienes cuatro opciones
1. escribir help para una lista de comandos y directorios
2. escribir un comando o directorio
3. escribir ".." para volver al directorio anterior
4. escribir "menu" para arrancar un programa que te permite navegar por los comandos/directorios de comandos; el problema es que muchas veces no puede ejecutar comandos, sino que sólo permite cambiar las opciones de los comandos (hay que usar el interfaz en modo texto para ejecutarlos)

Configuración del módem speedtouch:

{admin}[service system]=>list
Idx Name             Protocol         SrcPort  DstPort  Group            State   
---------------------------------------------------------------------------------
  1 CWMP_client      tcp                       80                        disabled
  2 CWMP_server      tcp                       51005                     disabled
  3 DHCP-S           udp                       49152                     enabled 
  4 DNS-C            udp                       53                        disabled
  5 DNS-S            udp                       53                        disabled
  6 Dynamic DNS                                                          enabled 
  7 FTP              tcp                       21                        enabled 
  8 HTTP             tcp                       80                        disabled 
  9 HTTPI            tcp                       8080                      disabled
 10 HTTPs            tcp                       443                       disabled
 11 IGMP-Proxy       igmp                                                disabled
 12 IP_COMMANDS                                                          enabled 
 13 MDAP             udp                       3235                      enabled 
 14 PING_RESPONDER   icmp                      8                         enabled 
 15 PPTP                                                                 disabled
 16 RIP              udp              520      520                       disabled
 17 SNMP_AGENT       udp                       161                       disabled
 18 SNTP             udp              123      123                       disabled
 19 SSDP             udp                       1900                      disabled
 20 TELNET           tcp                       23                        enabled 
 21 WEBF             tcp                       80                        disabled
{admin}[service system]=>Connection closed by foreign host.

Haciendo un escaneo, parece que es correcto:

internettiold:~# nmap sico2.sicosoft.es

Starting nmap V. 2.54BETA31 ( www.insecure.org/nmap/ )
Interesting ports on 228.Red-80-37-72.staticIP.rima-tde.net (80.37.72.228):
(The 1547 ports scanned but not shown below are in state: filtered)
Port       State       Service
22/tcp     open        ssh                     
53/tcp     open        domain                  
443/tcp    open        https                   
993/tcp    open        imaps                   
995/tcp    open        pop3s                   
1723/tcp   closed      pptp                    


Nmap run completed -- 1 IP address (1 host up) scanned in 85 seconds
internettiold:~#

Configuración del Módem Zyxel (antiguo, que ya han quitado):

Advanced

LAN

DHCP

None

TCPIP

IP Address	192.168.0.2
IP Subnet Mask	255.255.255.0
RIP Direction	Both
RIP Version	RIP-1
Multicast	None

NAT

SUA Only (Details)

	Start Port No.	End Port No.	IP Address
1	All ports	All ports	0.0.0.0
2	25	25	192.168.0.1
3	6544	6545	192.168.0.1
4	53	53	192.168.0.1
5	31000	31000	192.168.0.1
6	28001	28001	192.168.0.1
7	22	22	192.168.0.1
8	1723	1723	192.168.0.1
9	33335	33335	192.168.0.1
10	80	80	192.168.0.1
11	443	443	192.168.0.1
12	993	995	192.168.0.1

Security

[OK]	Telnet	Telnet traffic is blocked from the WAN to the LAN
[ ]	FTP	FTP traffic is blocked from the WAN to the LAN
[OK]	TFTP	TFTP traffic is blocked from the WAN to the LAN
[OK]	Web	Web traffic is blocked from the WAN to the LAN
[OK]	SNMP	SNMP traffic is blocked from the WAN
[ ]	Ping	Ping traffic is blocked from the WAN

Dynamic DNS

Not active

Remote Management

Server Type	Access Status	Port	Secured Client IP
Telnet	LAN Only	23	0.0.0.0
FTP	LAN Only	21	0.0.0.0
Web	LAN Only	80	0.0.0.0

Wireless

Not enabled

UPNP

Not enabled

System Status

System Name :
ZyNOS F/W Version:	V3.40(KN.1)b5 \| 9/18/2003
DSL FW Version:	Alcatel, Version 4.9.113
Standard:	ETSI

WAN Information:

IP Address:	80.37.72.228
IP Subnet Mask:	0.0.0.0
Default Gateway:	80.37.72.228
VPI/VCI:	8/ 32

LAN Information:

MAC Address:	00:a0:c5:ec:0f:b8
IP Address:	192.168.0.2
IP Subnet Mask:	255.255.255.0
DHCP:	N/A
DHCP Start IP:	N/A
DHCP Pool Size:	N/A

Otros datos

Wireless LAN router Thomson

SSID	SpeedTouch339FB7
WEB64bit	9FEF699A29

DNS	80.58.61.250
DNS(2)	80.58.61.254